Radiogenic Lead Isotopes and Time Stratigraphy in the Hudson River, New York

Radionuclide, radiogenic lead isotope and trace metal analyses on fine-grained sediment cores collected along 160 km of the upper and tidal Hudson River were used to examine temporal trends of contaminant loadings and to develop radiogenic lead isotopes both as a stratigraphic tool and as tracers for resolving decadal particle transport fluxes. Very large inputs of Cd, Sb, Pb, and Cr are evident in the sediment record, potentially from a single manufacturing facility. The total range in radiogenic lead isotope ratios observed in well-dated cores collected about 24 km downstream of the plant is large (e.g., maximum difference in ²⁰⁶Pb/²⁰⁷Pb is 10%), characterized by four major shifts occurring in the 1950s, 1960s, 1970s and 1980s. The upper Hudson signals in Cd and radiogenic lead isotopes were still evident in sediments collected 160 km downstream in the tidal Hudson. The large magnitude and abrupt shifts in radiogenic lead isotope ratios as a function of depth provide sensitive temporal constraints that complement information derived from radionuclide analyses to significantly improve the precision of dating assignments. Application of a simple dilution model to data from paired cores suggests much larger sediment inputs in one section of the river than previously reported, suggesting particle influxes to the Hudson have been underestimated.     

The Transit of 35SO4 2- and 3H2O Added In Situ to Soil in a Boreal Coniferous Forest

A solution containing ³⁵SO₄ ^2- and ³H₂O was applied to four plots (5 × 5 m) in a boreal coniferous forest in the Laflamme Lake watershed, Québec, under two contrasting conditions: in summer (plots 1 and 2), and on the snowpack before snowmelt (plots 3 and 4). The transit of both these tracers in the soil solution was then followed through a network of soil lysimeters located at different depths. Four months after the summer application, ³H₂O had infiltrated the whole soil profile at plot 1, while ³⁵SO₄ ^2- was only observed in the LFH and Bhf horizons. A ³⁵SO₄ ^2- budget calculated from mid-August to November indicated that 89 and 10.6% of the added ³⁵SO₄ ^2- was retained within the LFH and the Bhf layers, respectively. Fifteen months later, the added ³⁵SO₄ ^2- was distributed in the following proportions within the soil horizons: LFH (73.7%), Bhf (11.8%) and Bf (12.8%), for a total retention rate of 98.3%. The superficial penetration of ³H₂O at plot 2 was indicative of a major lateral water movement that prevented the calculation of a ³⁵SO₄ ^2- budget. This situation also was observed at plot 4 during snowmelt. At plot 3, ³H₂O moved freely through the soil profile and a significant fraction of the added ³⁵SO₄ ^2- reached the B horizons, where it was presumably adsorbed on aluminum (Al) and ferric (Fe) oxides. The ³⁵SO₄ ^2- budget for plot 3 from March to November indicated that 87% of the added ³⁵SO₄ ^2- was retained within the soil profile, with most being retained in the B horizons (LFH = 33.1%, Bhf = 33.1%, Bf = 20.8%). The contrasting retention patterns of ³⁵SO₄ ^2- within the soil profile following the summer addition and snowmelt likely was caused by the contrastingsoil temperatures and soil solution residence times within the differentsoil layers. The persistence of ³⁵SO₄ ^2- in the soil solution of the entire profile long after the initial tracer infiltration, and the relative temporal stability of specific activity of SO₄ ^2-, point to the establishment of an isotopic equilibrium between the added ³⁵SO₄ and the active S-containing reservoirs within a given soil horizon. Overall, the results clearly illustrate the very strong potential for ³⁵SO₄ ^2- retention and recycling in forest soils.     

Towards a model of safety climate measurement.

In this study, a survey instrument was developed to measure safety climate. A review of the scientific literature as well as consultation with an expert panel was used to determine the survey's dimensions. Next, the survey was administered, first as a pilot study (n = 15) and then as a full scale study (n = 229), to employees of the City of Cincinnati Department of Public Works. The psychometric integrity of the survey was assessed according to validity, reliability and utility criteria. Results are presented and discussed.     

Client–project manager engagements,trust, and loyalty

This study addresses the behaviors of project managers under various conditions of cognitive and affective trust, and the implications for obtaining client loyalty. Theoretical foundations were drawn from interpersonal and interorganizational trust literature. A test of the proposed theoretical framework was conducted in a field setting utilizing a matched design of both project managers and their clients. The results show that reliable project performance positively impacted client loyalty intentions and service‐oriented OCBs positively impacted client secondary retention. An interaction showed that in low cognitive trust situations the project manager behavior of reliable project performance facilitated the obtainment of client loyalty intentions. Implications for research and practice are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

MODELING THE IMPACT OF MULTICOMPONENT VOCs ON GROUND WATER USING THE STEFAN‐MAXWELL EQUATION1

ABSTRACT: Computer programs that model the fate and transport of organic contaminants through porous media typically use Fick's first law to calculate vapor phase diffusion. Fick's first law, however, is limited to the case of a single, dilute species diffusing into a stagnant, high concentration, bulk vapor phase. When dealing with more than one diffusing species and at higher concentrations, the multicomponent coupling effects on vapor phase diffusion and advection of the various constituents become significant. VLEACH, a one‐dimensional finite difference model developed for the U.S. Environmental Protection Agency (USEPA), is typical of the models using Fick's first law to model vapor‐phase diffusion. The VLEACH model was modified to accommodate up to 10 components and to calculate the binary diffusion coefficients for each of the components based on molecular weight, molecular volume, temperature and pressure, and to address the coupling effects on multiple component vapor phase diffusion and its impact on ground water. The resulting model was renamed MC‐CHEMSOIL. At low vapor phase concentrations, MC‐CHEMSOIL predicts identical ground water impacts (dissolved phase loading) to those from VLEACH 2.2a. At higher vapor phase concentrations, however, the relative difference between the models exceeded 20 percent.     

The effects of parental altruism on the governance of family‐managed firms

We draw on the economic, corporate governance, and family business literatures to explain why the effects of family on family firms makes this governance form theoretically distinct from those of public and private non‐family firms. Our thesis is that parental altruism, when combined with private ownership and owner‐management, influences the ability of the firm's owner‐manager to exercise self‐control, which, in turn, can expose some family firms to conflicts rooted in the agency threats of moral hazard, hold‐up, and adverse selection. We then discuss why some other family firms are able to minimize these dark side threats and thereby attain altruism's brighter side. Finally, we discuss how altruism's influence changes over time as ownership becomes dispersed among family members and across generations. Copyright © 2005 John Wiley & Sons, Ltd.     

Job level risk assessment using task level strain index scores: a pilot study.

This paper explores 2 methods of modifying the Strain Index (SI) to assess the ergonomic risk of multi-task jobs. Twenty-eight automotive jobs (15 cases and 13 controls) were studied. The first method is based on the maximum task SI score, and the second method is modeled on the NIOSH Composite Lifting Index (CLI) algorithm, named cumulative assessment of risk to the distal upper extremity (CARD). Significant odds ratios of 11 (CI 1.7-69) and 24 (CI 2.4-240) were obtained using the modified maximum task and CARD, respectively. This indicates that modification of the SI may be useful in determining the risk of distal upper extremity injury associated with a multi-task job.     

Long-term effects of sustained beef feedlot manure application on soil nutrients, corn silage yield, and nutrient uptake

A field study was initiated in 1992 to investigate the long-term impacts of beef feedlot manure application (composted and uncomposted) on nutrient accumulation and movement in soil, corn silage yield, and nutrient uptake. Two application strategies were compared: providing the annual crop nitrogen (N) requirement (N-based rate) or crop phosphorus (P) removal (P-based rate), as well as a comparison to inorganic fertilizer. Additionally, effects of a winter cover crop were evaluated. Irrigated corn (Zea mays L.) was produced annually from 1993 through 2002. Average silage yield and crop nutrient removal were highest with N-based manure treatments, intermediate with P-based manure treatments, and least with inorganic N fertilizer. Use of a winter cover crop resulted in silage yield reductions in four of ten years, most likely due to soil moisture depletion in the spring by the cover crop. However, the cover crop did significantly reduce NO3-N accumulation in the shallow vadose zone, particularly in latter years of the study. The composted manure N-based treatment resulted in significantly greater soil profile NO3-N concentration and higher soil P concentration near the soil surface. The accounting procedure used to calculate N-based treatment application rates resulted in acceptable soil profile NO3-N concentrations over the short term. While repeated annual manure application to supply the total crop N requirement may be acceptable for this soil for several years, sustained application over many years carries the risk of unacceptable soil P concentrations.     

MODELING THE DISTRIBUTION OF DIFFUSE NITROGEN SOURCES AND SINKS IN THE NEUSE RIVER BASIN OF NORTH CAROLINA,USA1

This study quantified nonpoint source nitrogen (NPS‐N) sources and sinks across the 14,582 km² Neuse River Basin (NRB) located in North Carolina, to provide tabular data summaries and graphic overlay products to support the development of management approaches to best achieve established N reduction goals. First, a remote sensor derived, land cover classification was performed to support modeling needs. Modeling efforts included the development of a mass balance model to quantify potential N sources and sinks, followed by a precipitation event driven hydrologic model to effectively transport excess N across the landscape to individual stream reaches to support subsequent labeling of transported N values corresponding to source origin. Results indicated that agricultural land contributed 55 percent of the total annual NPS‐N loadings, followed by forested land at 23 percent (background), and urban areas at 21 percent. Average annual N source contributions were quantified for agricultural (1.4 kg/ha), urban (1.2 kg/ha), and forested cover types (0.5 kg/ha). Nonpoint source‐N contributions were greatest during the winter (40 percent), followed by spring (32 percent), summer (28 percent), and fall (0.3 percent). Seasonal total N loadings shifted from urban dominated and forest dominated sources during the winter, to agricultural sources in the spring and summer. A quantitative assessment of the significant NRB land use activities indicated that high (greater than 70 percent impervious) and medium (greater than 35 percent impervious) density urban development were the greatest contributors of NPS‐N on a unit area basis (1.9 and 1.6 kg/ha/yr, respectively), followed by row crops and pasture/hay cover types (1.4 kg/ha/yr).